Maono BA37 Microphone Suspension Boom Arm Stand price in Pakistan product image
Maono

Maono BA37 Microphone Suspension Boom Arm Stand

Rs 15,500

Currency: PKR

0.0
Availability:
20 in stock
100% Branded Original Products

The Maono BA37 is a heavy-duty suspension boom arm stand built for serious streaming, podcasting and recording setups. It carries microphones up to 2.5kg (5.5 lbs) — 25% more than similar arms — so even large broadcast microphones like the Shure SM7B stay exactly where you position them.

Two 35cm arm sections on five adjustable nodes give you 27.6 inches of horizontal reach and 29.6 inches of vertical reach, with joint movement up to 360 degrees. Internal springs keep every adjustment silent, so repositioning the microphone mid-stream never reaches your recording. The upgraded C-clamp grips desktops up to 2.36 inches thick, sits closer to the wall than standard clamps, and even carries a built-in headphone hook. A 3/8" to 5/8" screw adapter is included in the box. Order from WaddaGamer.Com with delivery all over Pakistan.

1
map We Deliver All Over Pakistan

We offer delivery services across Pakistan for your convenience. Here are the details of our shipping options:

leopard courier Leopards Courier

We also partner with Leopards Courier for deliveries throughout Pakistan. Here are the estimated delivery times for different scenarios:

  • Cash on Delivery (COD) Parcel Delivery to Other Cities: 2 to 4 days (COD parcels are not insured)
  • Non-COD Parcel Delivery to Other Cities – Over Night: 2 to 4 days
  • Non-COD Parcel Delivery to Other Cities – Detain: 3 to 4 days

Expedited delivery within 48 hours. Please note that the delivery times mentioned above are approximate and may vary depending on the location and other factors. We strive to ensure safe and secure shipping for all orders.

At WaddaGamer, we prioritize the safety and security of your packages to ensure a smooth delivery experience.

  • To claim a warranty issue, fill out the Return/Warranty Claim Form available on our website.
  • Defective or faulty products under warranty are sent to the distributor/vendor for repair, refund, or replacement based on their warranty policies.
  • Warranty claims will be rejected if the product has been physically damaged, incorrectly installed, or subjected to abuse.
  • Replacing faulty equipment is done after the official service agent confirms the warranty issue. The warranty process usually takes up to 20 working days to complete.
  • Warranty eligibility is applicable only to products with warranty information mentioned on the product page. Products without warranty information are not covered.

You can exchange any product purchased from WaddaGamer within 14 days of purchase under the following conditions:

  • The item(s) is faulty, damaged, or defective at the time of delivery (applicable for non-COD orders).
  • The item(s) does not match the original specifications or is different from what you ordered.

To raise a dispute, please notify us within 3–4 days of delivery by contacting our support team via email at support@waddagamer.com or by calling 0300-0680143. Each dispute will be evaluated on a case-by-case basis, and we strive to find a fair resolution for both parties.

For damaged items, it is essential to provide an unboxing video as evidence. Please email the video to support@waddagamer.com within 14 days of purchase to initiate the replacement process.

Returns:

If a product received does not match the description on our website, you have 7 working days from the date of delivery to claim an exchange or cancel the order. To initiate a return, the product(s) must be undamaged, unopened, and returned with all packaging materials and documentation.

Refund Policy:

If an order is canceled for any reason, the refund will be processed within 3 to 4 days. In the event that you are not satisfied with your purchase or there are certain circumstances where a refund is applicable, WaddaGamer offers a refund policy. If the payment was made through a merchant, the refund will be processed through the same merchant channel.

Please note that if the payment was made via credit or debit card, any applicable refund may take 7 to 10 additional working days to reflect in your account, as per Pakistan's payment security standards.

To initiate a refund, please contact our support team at support@waddagamer.com or WhatsApp: 0300-0680143 within the specified time frame.

Product Description

The Maono BA37 is a suspension boom arm stand designed for creators whose microphones have outgrown basic desk stands. A floating boom arm keeps your microphone at mouth level, clears your desk for your keyboard, mouse and monitors, and lets you push the mic aside the moment you stop recording. The BA37 does all of that with the strength and silence that live production demands.

Its headline figure is load capacity: 2.5kg (5.5 lbs), which Maono rates as 25% more load-bearing than similar products. That headroom matters because modern streaming microphones keep getting heavier — large dynamic broadcast microphones, shock mounts and accessories add up quickly. The BA37 holds them steady without sagging, drifting or slowly sinking during a long session.

Whether you stream games, record a podcast, or produce voice-overs, the BA37 gives your microphone a stable, silent and flexible home above your desk.

Key Features

  • Enhanced load capacity of 2.5kg (5.5 lbs) — 25% more than similar boom arms

    27.6 inches of horizontal reach and 29.6 inches of vertical reach

    Two 35cm arm sections with 5 adjustable nodes for precise positioning

    Wide joint movement — 225°, 270°, 120° and 360° adjustment angles

    Internal springs designed for silent operation while you adjust on air

    Upgraded C-clamp for desktops up to 2.36 inches thick, with a wide 4200mm² contact surface

    Clamp design sits closer to the wall than standard boom arm clamps

    Integrated headphone hook on the clamp keeps your desk organised

    3/8" to 5/8" screw adapter included for wide microphone compatibility

    Compatible with Maono, Shure, Audio-Technica, HyperX and Razer microphones

Strength That Heavy Microphones Need

A boom arm is only as good as its ability to hold position. The BA37's 2.5kg load capacity covers the microphones creators actually use, including heavy broadcast dynamics such as the Shure SM7B and MV7, the Audio-Technica AT2020, and Maono's own PD400X, PM450, PD200X and PD100X. Add a shock mount and the total still sits comfortably within the arm's rating.

That strength shows up in daily use as stability. The microphone does not creep downward during a three-hour stream, does not wobble when you tap the desk, and does not need constant re-tightening. You set your position once and trust it for the whole session.

Silent Adjustment, On Air

Repositioning a microphone mid-recording is where cheap arms betray you — every creak and spring twang goes straight into the audio. The BA37's springs are internal and specifically designed for silent operation, so you can pull the microphone closer for an intense moment or push it away for a break without adding mechanical noise to your stream.

Five adjustable nodes across the two 35cm sections let you fine-tune height, reach and angle independently. The joints move through wide angles — up to 360 degrees at the base — so the arm folds flat against the wall when you need desk space and swings back into place in seconds.

A Clamp Designed for Real Desks

The upgraded C-clamp fits desktop thicknesses up to 2.36 inches and spreads its grip over a 4200mm² contact surface, which keeps the arm planted without damaging the desk edge. Its lateral-force design also sits closer to the wall than standard clamps, a small detail that makes a real difference in compact streaming rooms where every centimetre behind the desk counts.

The clamp carries one more thoughtful extra: an integrated headphone hook. Your headphones hang on the clamp instead of cluttering the desk, right next to the microphone they work with.

Technical Specifications

  • Product type: Microphone suspension boom arm stand

    Load capacity: Up to 2.5kg (5.5 lbs)

    Horizontal reach: 27.6 inches

    Vertical reach: 29.6 inches

    Arm sections: 2 × 35cm (13.8 inches)

    Adjustment nodes: 5

    Joint angles: 225° / 270° / 120° / 360°

    Springs: Internal, designed for silent operation

    Desk clamp: C-clamp, desktops up to 2.36 inches thick, 4200mm² contact surface

    Extras: Integrated headphone hook on clamp

    Adapter: 3/8" to 5/8" screw adapter included

    Colour: Black

What's in the Box

  • Maono BA37 scissor arm stand × 1

    Table mounting clamp × 1

    3/8" to 5/8" screw adapter × 1

    Cable straps × 2

Frequently Asked Questions

Which microphones work with the Maono BA37?

Maono's official compatibility list includes the Maono PD400X, PM450, PD200X and PD100X, the Audio-Technica AT2020, the Shure SM7B and MV7, the HyperX QuadCast and SoloCast, and the Razer Seiren Mini. With the included 3/8" to 5/8" adapter and a 2.5kg load rating, most studio and streaming microphones mount without extra parts.

How much weight can the BA37 hold?

The BA37 is rated for microphones up to 2.5kg (5.5 lbs), which Maono describes as 25% more load-bearing than similar boom arms. That covers heavy broadcast microphones together with their shock mounts, so the arm holds position without sagging during long sessions.

Will the BA37 clamp fit my desk?

The upgraded C-clamp fits desktop thicknesses up to 2.36 inches and grips across a wide 4200mm² contact surface for stability. Its design also sits closer to the wall than standard clamps, which helps in smaller rooms. Measure your desk edge thickness before ordering if it is unusually thick.

Is the BA37 quiet when adjusted during a stream?

Yes. Its springs are mounted internally and designed for silent operation, so moving the microphone closer or pushing it aside does not add creaks or spring noise to your recording. The five adjustable nodes let you reposition smoothly with one hand while you keep talking.

Does the BA37 include a microphone or cables?

No. The box contains the scissor arm stand, the table mounting clamp, a 3/8" to 5/8" screw adapter and two cable straps for tidying your microphone cable along the arm. The microphone itself is sold separately — pair it with a Maono PD200X or PD300X for a complete setup.

Buy the Maono BA37 from WaddaGamer.Com

Order the Maono BA37 boom arm stand today and give your microphone the stable, silent positioning your content deserves. Need a microphone to mount on it? See the Maono PD300X and PD200XS kits in our store. WaddaGamer.Com offers delivery all over Pakistan — place your order on WhatsApp at 0300 0680143 and our team will confirm it right away.

Use these internal links to continue exploring similar categories and curated store sections.

Shop more in Accessories

Explore similar accessories and discover more options in the same category.

Browse category

Featured gaming products

See highlighted products that we surface across the store for quicker discovery.

View featured

Maono gear collection

Keep exploring more products related to Maono and adjacent gaming categories.

Explore more